Tips For Troubleshooting Your Home Alarm System In Charlotte
System malfunctions and false alarms can be aggravating, and even more concerning, may prevent your security system from doing its job effectively. Luckily, most problems, from false alarms to dead batteries, are simple to fix. Explore our suggestions for troubleshooting your home alarm system in Charlotte. We’ll help keep your family members shielded and your system running properly.
Test Your Home Security System In Charlotte
One effective way to troubleshoot your property’s defense is to test it! The latest systems let you place them in test mode to avoid prompting an emergency response from monitoring agents. After switching to test mode, do the following:
- Activate your system as you normally would when you leave.
- Open a door or window that has a contact sensor, or try to trip another sensor. Close the window or door once you’re finished so it doesn’t prompt the alarm as you leave test mode.
- Permit the alarm to resonate for 60 seconds to make sure a transmission is delivered to the security company and an entry is made in the alarm activity log.
- Continue testing devices as you wish
- Review the system activity log to confirm that everything’s working.
Rest assured, monitoring specialists will be able to see that your system is undergoing a test. Be sure to turn test mode off when complete. It’s a good idea to test once a month or whenever you adjust your home’s internet or phone provider.
Check The Placement And State Of Motion Sensors
Although an essential part of your alarm system, motion detectors are prone to false alarms. You can help prevent them with a few basic troubleshooting steps.
- Perform a physical check. Are there things that could shift within the sensor’s detection area, like drapery blown in a breeze?
- Is the sensor covered in dust? Dirt, cobwebs, and debris can cause malfunctions. Ensure the sensor is clean.
- Does the motion detector offer pet immunity you can turn on? Some sensors can be programmed to disregard pets weighing up to 100 pounds.
- When was the battery changed? Low batteries may impact performance or lead to false alarms.
- Is the sensor aimed toward a source of heat? Excessive heat from a fireplace, direct sun, or something else can trigger an alarm.
Keep Batteries Ready And Watch Out For Low Battery Warnings
One helpful benefit of the latest home security systems is that they’ll alert you when batteries are getting low. If your system is equipped with a control panel or smartphone app, you’ll usually find notifications there. Depending on your alarm, you could hear an intermittent beep when batteries are low.
Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that should be replaced every 1 to 2 years. It’s wise to keep batteries on hand and establish a replacement schedule. Top systems also include a rechargeable backup battery for the main control panel. This backup battery helps keep your system operating if you have a power outage and should charge back up once power is back online. If it doesn’t, you should replace it.
Troubleshooting Is Simple With ADT Home Security In Charlotte
As the foremost name in home security, ADT creates systems that supply superior functionality and convenience. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always get alerts when a battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Charlotte home. Place a call to (704) 980-0988 or submit our form today!